How to put on and fasten the bracelet on your wrist: 5 reliable ways

Every woman who loves to wear bracelets once faced this. Some don't even put them on when there is no one at home to help. But what to do if you want to put on a bracelet (read - it is necessary), but there is no one to help?

There is a way out of this situation, and even several. It’s not so difficult to fasten a bracelet on your own hand if you know a few tricks.

Is it possible to fasten the bracelet with one hand at all

In fact, it is quite possible to do this with one hand, and this is not some kind of trick or acrobatic stunt. But there are several important nuances:

• doing it is still inconvenient;
• takes time;
• it might not work if you're nervous.

In a hurry, this method is considered the most impractical, because you need to have time to get together as soon as possible. When picking up quickly, your hands may tremble or sweat, making the task more difficult. In addition, some fasteners may break or vice versa - break your nail. For this reason, fastening the bracelet with one hand is best when you do not need to rush anywhere.

However, there are several models that are easy and simple to put on on your own. These include:

• on an elastic band - mainly bracelets made of beads or stones, collected on an elastic band;
• on a magnet — the most comfortable accessories. To fasten such an ornament, you only need to bring one of its edges to the other so that the magnets are attracted;
• hinged clasp - an unusual option that will definitely attract your attention. An important element of a hinged lock is a pin - a metal rod. It must be inserted inside the hinge and that's it, the bracelet is fastened. This is much more convenient to do than fiddling with small chains and buttons;
• crutch - it is also called a T-lock, and not at all by accident. Such a fastener is a ring where you need to insert a pin in the form of the letter T. The shoulders of the pin are slightly wider than the diameter of the ring, so it is inserted there only at a certain angle. Despite the fact that the design seems very simple, it holds very well on the hand.

There are also bracelets that do not need to be fastened at all - they are simply pulled through the hand. Such options look stylish, and most importantly, they do not cause trouble for the owner.

If you are a lover of beautiful manicure, choose bracelets and chains with large clasps. Otherwise, you risk ruining your nails by trying to push the small hook.

But if you already have a couple of bracelets that you really want to wear, then you will have to be content with the clasp already installed. And, therefore, to look for the most optimal way for yourself. It should be borne in mind that there is simply no universal option for everyone - it is important to try several methods and choose the best one.

The first way to put on the bracelet yourself: a paperclip

This is the most popular option, which is chosen by many girls and women. All it takes is a simple paper clip.

In order to put the bracelet on your own hand, you need to unbend the paper clip, making something like the Latin letter “S” out of it. Then you need to thread one loop into the ring a little further than the clasp, and hold the other in the hand with the bracelet. So the free edge of the chain will not fall off the wrist and it will be easy for you to fasten the jewelry.

Of course, this method has its pros and cons. To make it easier to decide, we will analyze this in more detail. First, let's talk about the benefits this method:

• ease of use;
• you only need one paperclip;
• the option is absolutely safe for decoration and its owner;
• the chain is easy to fix and pull.

But also shortcomings the "paperclip" has a lot:

• not every home has metal clips;
• each time you need to either look for the previous unbent paper clip, or spoil another one;
• if there are too small links in the chain, then it will not work to pass the paperclip;
• finding such a trifle in a hurry can also be problematic.

If you often wear bracelets, then it is better to have one such paper clip and store it next to your jewelry. So you will know exactly how to fasten the accessory and where your device is.

The second way how to fasten the bracelet yourself: scotch tape

If there are no metal clips in your house, then you can immediately move on to the next method. In the second case, you will need adhesive tape, which can certainly be found in any home.

To fasten the bracelet on your wrist yourself, you need to follow a simple algorithm:

1. Cut off a small piece of tape.
2. Attach with it the free edge to the wrist. In this case, the last links must be open, otherwise you will not be able to fasten the accessory.
3. Fasten the decoration with your free hand.

As an adhesive tape, you can choose not only adhesive tape. Anything with which you can stick a bracelet to your hand will do - for example, adhesive tape, masking tape, or even electrical tape.

If the bracelet is heavy, then it may simply not work to stick the adhesive tape the first time. In this case, it is recommended to use any flat surface to hold the free edge of the bracelet.

pros this method:

• everyone has duct tape in their house;
• simple implementation.

The idea seems simply ingenious, but in practice, the option with scotch tape does not perform as well as we would like:

• adhesive tape, and especially electrical tape, leaves sticky marks on the hand and on the jewelry, which are difficult to wash off;
• you need to quickly find not only adhesive tape, but also scissors;
• there may be a problem with finding the free edge of the adhesive tape;
• if you cut off too large a piece, it will twist into a tube;
• hair can stick to the tape.

It is also worth considering the characteristics of your body. Sensitive people may be allergic to adhesive tape, and tearing off adhesive tape from your hand is still not very pleasant.

However, this method is very popular, so you should definitely try it. In this way, you can also unfasten the bracelet, which also sometimes causes difficulties.

The third way to put on the bracelet yourself: using a thick thread

This option will especially appeal to needlewomen who have a lot of yarn in their house. The method is extremely simple:

• Take a piece of thick thread, you don’t even have to cut it off if you don’t want to spoil the material. Only in this case, try not to drop the skein of yarn, otherwise you risk getting tangled in the threads.
• Pass it through the link of the chain and make a kind of loop.
• Use the loop to pull on the bracelet and fasten.

It is advisable to choose large threads, as thin sewing will slip between small holes in the chain.

The benefits There are several options for this:

If you are going to constantly use this method, then you can cut a piece of thread of a suitable length and store it next to the jewelry.

Method four: we fasten the bracelet with the help of invisibility

This option is suitable for many fashionistas, since almost everyone has invisibility. In addition, it can be used not only at home, because such small hairpins are often in the purse of women and girls.

This method works in much the same way as in the case of a paper clip. All that is needed is to thread the invisibility into the link of the chain and pull it. The smaller the hairpin, the wider the scope of its application, because a wide model cannot be threaded into small links.

Alternatively, a hairpin or safety pin will do.

The stealth variant has the following pluses:

• universality;
• ease of use;
• safety for decoration;
• the invisibility itself remains whole and unharmed.

Rђ RІRѕS, minuses much less than the previous methods:

• at the right time, the invisible may not be around;
• a hairpin that is too wide may not fit into small links.

But both of these shortcomings are easy to solve. In the first case, it is necessary to put the desired invisibility next to the jewelry (or even tie it to a jewelry box), and for bracelets that are too small, use a hairpin or even a pin.

Fifth way: fasten the jewelry with ... another jewelry!

And although the name sounds incomprehensible, everything is very simple and convenient. To fasten the bracelet on yourself with one hand, you can simply use another bracelet or a long earring.

To do this, you need to thread the second bracelet or earring into the link of the chain a little further than the free edge, fasten it if necessary and pull it towards you.

The benefits this method has quite a few:

• no need to look for something, as the decorations are nearby;
• this option cannot cause an allergic reaction or damage products;
• way is easy to use.

Some shortcomings unfortunately it has:

• you may not have a second bracelet or matching earrings;
• the second bracelet will then have to be unfastened with one hand, which is also not always easy (therefore, it is better to use an earring with a loop clasp).

This option seems to be the easiest and most comfortable to use.

It is quite possible to fasten the bracelet yourself. The main thing is not to succumb to emotions and despair, try not to cry, because you can ruin your makeup. If you have very little time left, but you really want to wear a beautiful piece of jewelry, then you should contact your neighbors. It is likely that they will not refuse such a simple request.